Training Requirements - Oce Arizona 640 GT User Manual

Training Requirements

Training Requirements
Introduction
The operator must receive training for safety issues, printer operation, and the appropriate ONYX
Workflow software (ProductionHouse® or THRIVE) prior to operating the printer.
Safety Training
Before operating the Océ Arizona 600 Series printer, make sure you have read and understood all
of Chapter 3 "Safety Guidelines".
Océ Operator Training
For optimal safety and print quality, all printer operators must have received training by qualified
Océ service personnel. Océ training provides a general orientation to printer safety and operating
procedures. This User Manual is not a substitute for official training.
Onyx ProductionHouse Training
Maximum performance from the printer requires a properly trained operator. Océ trains the
operator in the use of the printer hardware and software at installation. However, this is not a
substitute for formal training.
Operators must be fully versed in the operation of ONYX Workflow software . For any operator
unfamiliar with their operation, ONYX ProductionHouse® or THRIVE training is required. Training
courses are available; contact your local representative for an ONYX-certified training program.
62 Chapter 5 - How to Operate Your Océ Arizona Printer
Océ Arizona 600 Series