Oce Arizona 640 GT User Manual page 57

you have your range selected you can then delete them. Click on the column heading to sort the
display of print jobs by that criteria.
Special Prints
The Special Prints module displays two lists. The list on the left shows the available special
prints. Some of these prints are used by service technicians to adjust and troubleshoot the
printer. Some are of interest to the Operator: the Ship print, the table ruler prints, the Nozzle
Check print, and the Media Advance Correction Factor print.
Special Prints of Interest to the Operator
• the Reference print is used to determine that the printer output meets quality standards. A ship
print that is printed at the factory is shipped with each printer. It can be used as a comparison
with one printed at the customer site.
• The Table Rulers are meant to be printed on the table to assist you to place media. These
images are set up to print on the horizontal and vertical axes of the table. They are available in
metric or imperial measure.
• The Nozzle Check is used to determine if there are any clogged nozzles that can affect print
quality (note that it is also available on the command toolbar in the Print Job Control module).
• the Media Advance Correction Factor print (used for roll media only). This print is used to
correct a certain type of banding related to incorrect media advance - see How to Determine
Media Advance Correction.
The list on the right shows all active jobs that are currently in the print queue. Add a special print
from the left into the right list to make it active in the Print Job Control module. If you remove a
job from this list, it is also removed from the Active job list and is not available to print. Special
print instances that are removed from the Active list do not go to the Inactive list; they are simply
removed.
[44] Special Prints
How to Load a Special Print
1) Click a special print to select it in the left window.
2) Click the Add button to place it in the print queue on the right.
Océ Arizona 600 Series
Chapter 4 - How to Navigate the User Interface
Tools and Utilities Module
57