Oce Arizona 640 GT User Manual page 155

B. Printing a Single Layer Print Job with White Ink
For print jobs that do not use Quality-Layered mode:
NOTE
When you print white ink with print modes other than Quality-Layered, it is not recommended to
print white ink in the same area of an image as CMYK inks. The white ink does not mix well with
the other ink colors.
1. Create spot data in a design application. (See section "How to Create Spot Data")
2. Open the job in ONYX workflow software using any print mode other than Quality-Layered
with an ONYX media profile that supports printing of white spot ink.(See section "White Ink
and Varnish Media Profiles")
3. Submit the print job (i.e., process/rip the job).
4. Send the job to the printer and then print it.
Océ Arizona 600 Series
Chapter 9 - How to Work With White Ink and Varnish
How to Print White Ink Jobs
155