Oce Arizona 640 GT User Manual page 39

Component
10) Vacuum Zone Control
Handles
11) Ink Bay
12) Ink Filters
(13) Coolant Bottle
(14) Vacuum Table Foot
Switch
(15) Bulkhead access door
[31] Ink Bays and Vacuum Zone Control Handles
Océ Arizona 600 Series
Function
Five vacuum zone control handles determine if vacuum zones 2 to
6 on the printer table are active when the vacuum pump is switch-
ed on. Zone 1 is always on so it has no control handle. The zones
on the Océ Arizona 600 Series XT model are different (see Chapter
6 for details).
There are two ink bays: the Primary bay contains CMYK ink and
the coolant bottle; the Secondary bay holds the additional Cyan or
Magenta, and White ink or Varnish.
Ink filters are behind a door under the ink bags. The filters remove
unwanted particulate matter from the ink.
Provides coolant to maintain correct temperature of the ink in the
printheads.
Toggles the pump to turn the table vacuum on/off. Vacuum must
be on prior to starting a print.
Provides access to the connections required to plug in the podium
components such as LCD monitor, mouse, and E-stop. Also is a
storage location for the coolant supply bottle.
Chapter 4 - How to Navigate the User Interface
Operator Interface Hardware
39