How to Bleed an Ink Filter
NOTE
The same syringe can be used to bleed all the ink channels if they are done in succession. The
syringe cannot be stored and reused as the ink chemistry will degrade the syringe. If only some
of the ink channels require bleeding, discard the syringe immediately after finishing those
channels. Do NOT reuse it on other ink channels at a later date.
12.
Check the new filter, if it was replaced, to make sure there are no ink leaks.
13.
Open any purge valves on the carriage that are still closed.
14.
Use a marker or create a label to record the install date if the filter was replaced.
15.
Replace the ink filter enclosure cover.
16.
Perform routine printhead maintenance before printing.
17.
Replace the ink filters every 12 months or after consumption of 11 bags (22 liters) of ink.
210
Chapter 12 - Printer Maintenance
Océ Arizona 600 Series