How to Remove the UV Lamp Bulb
Procedure
IMPORTANT
Use cotton gloves when handling the UV lamp and Shutter assemblies; oil from fingers can
harm these components and shorten lamp life.
1.
Put on protective eye wear and cotton gloves.
2.
Turn the housing upside down on a clean work space away from the printer.
3.
Rotate the shutter motor dampener until the UV shutters are open.
[144] Rotate shutter motor dampener
4.
Open the two UV light shields located at both ends of the UV lamp by rotating them fully in the
counter-clockwise direction.
[145] Rotate light shields
5.
Disconnect both UV lamp cables by first loosening the screw lock and then pulling the lock away
from the connectors.
Océ Arizona 600 Series
How to Remove the UV Lamp Bulb
Chapter 12 - Printer Maintenance
213