Oce Arizona 640 GT User Manual page 80

How to Handle Media
Media Registration
Media can be registered on the table using the table rulers. These rulers are printed on the table
and provide a horizontal and vertical rule that originate from the 0,0 print origin point on the
table. The rulers can also help to provide offset distances if you need to start a print away from
the origin point.
Alternately, the media registration cards can be used to register media if it must be placed
consistently away from the table rulers. These PVC adhesive-backed card can be placed anywhere
on the table to set new coordinates for print origin to enable consistent registration of media in
that location. Make sure that you set the offsets to match the location of the cards. Note: these
cards can be stacked, but if more than two of them are stacked, the carriage will collide with them
if you print at zero media height. Always check the height if you use multiple stacked cards so
that they match the height of your media and the set the carriage height accordingly.
80 Chapter 5 - How to Operate Your Océ Arizona Printer
Océ Arizona 600 Series