Oce Arizona 640 GT User Manual page 222

How to Remove Uncured Ink on the Capstan
[153] Wipe up remainder of ink
4. Allow adequate time for capstan to dry.
NOTE
If the scrubbing action leaves fibers from the cloth on the surface, wait for the surface to dry
completely, then follow the procedure listed above for Removing Solid Debris.
When the capstan is kept clean and its rubber surface free of blemishes or defects you will be
ensured of accurate media transport and optimal print quality. If its surface is badly damaged
the capstan will need to be replaced.
222 Chapter 12 - Printer Maintenance
Océ Arizona 600 Series