Oce Arizona 640 GT User Manual page 100

Loading the Media - Standard Method
[64] Align Media
7. Rewind the media by continually pressing down the left foot pedal until it is positioned where it
can be taped to the take-up core.
8.
Tape the media onto the core. The media should have a clean straight edge prior to taping. First
tape the center of the media to the core, and then tape both ends of the media.
[65] Tape Media to the Take-up Roll Core
NOTE
Important: Use the supplied ruler to check that the edge of the take-up roll is aligned within
1mm of the feed roll.
9.
Select the "Initialize" icon from the Roll Media Manager to prepare the RMO for printing.
100 Chapter 7 - How to Operate the Roll Media Option
Océ Arizona 600 Series