Entrance Solenoid (Sl1) - Konica Minolta Bizhub-C31P Service Manual

Field Service Ver. 1.0 Apr. 2008
[5]
[3]
[4]
2.3.16

Entrance solenoid (SL1)

1. Remove the front cover.
See P.7
2. Remove the rear cover.
See P.8
[2]
[1]
5. Remove the right metal plate cover.
See P.9
[1]
[3]
[2]
A01FF2C515DA
[2]
[1]
A01FF2C516DA
A01FF2C028DA
6. Loosen the screw [1].
7. Remove two screws [2] and remove
the ground wire.
8. Remove four screws [3], disconnect
the connector [4] and remove the exit
roller up/down motor assy [5].
9. Remove two screws [1] and remove
the exit roller up/down motor [2].
3. Disconnect two connectors [1].
4. Remove the harness from the wire
saddle [2].
2. Other
19