Konica Minolta Bizhub-C31P Service Manual page 154

Field Service Ver. 1.0 Apr. 2008
MAINTENANCE PRINT MENU
MENU
ALIGNMENT
SUPPLIES
QUICK
SETTING *11
*1: It will be displayed only when an optional hard disk kit or compact flash is installed.
*2: It will be displayed only when an optional duplex option is installed.
*3: It will not be displayed when an optional staple finisher is installed.
*4: It will be displayed only when an optional hard disk kit or compact flash (1 GB or more)
is installed.
*5: It will be displayed only when an optional staple finisher is installed.
*6: It will be displayed only when the following setting is set to "ENABLE."
[INTERFACE MENU] → [MEMORY DIRECT]
*7: It will not be displayed when the flash memory is not connected or not recognized.
*8: It will be displayed only when the following setting is set to "ENABLE."
[INTERFACE MENU] → [CAMERA DIRECT]
*9: It will be displayed when [ENERGY SAVER] is set to either of the options other than
OFF.
*10: It will be displayed only when a compact flash is installed.
*11: It will be displayed only when a USB memory device is installed.
MENU
EVENT LOG
HALFTONE 64
HALFTONE 128
HALFTONE 256
GRADATION
TOP ADJUSTMENT
LEFT ADJUSTMENT
LEFT ADJ DUPLEX
TRANSFER SIMPLEX PASS
POWER
DUPLEX PASS
MANUAL DUPLEX
IMG ADJ THICK
IMG ADJ BLACK
REPLACE TRANS. BELT
TRANS ROLLER
FUSER UNIT
UPDATE SETTING
BACKUP SETTING
9. Menu
Ref. page
P.173
P.173
P.173
P.174
P.174
P.174
P.174
P.175
P.175
P.175
P.176
P.176
P.176
P.177
P.177
P.177
P.177
P.178
117