11.3 Service Menu; Serial Number; Firmware Version; Alignment - Konica Minolta Bizhub-C31P Service Manual

11. SERVICE MENU

11.3 SERVICE MENU

11.3.1

SERIAL NUMBER

Function • Displays the serial number of the printer.
Use • To confirm the printer's serial number.
Setting 1. Select [SERVICE MENU] and press the Menu/Select key.
/procedure 2. Select [SERIAL NUMBER] and press the Menu/Select key.
3. The serial number of the printer is displayed.
11.3.2

FIRMWARE VERSION

Function • Displays the version number of the printer firmware.
• To use when the firmware is updated.
• To confirm the version number of the printer firmware.
CONTROLLER F/W: Firmware of controller
Use ENGINE F/W
FINISHER F/W
BOOT/F/W
Setting 1. Select [FIRMWARE VERSION] and press the Menu/Select key.
/procedure 2. Select desired firmware and press the Menu/Select key.
3. Version number of firmware is displayed.
11.3.3

ALIGNMENT

A. TOP ADJUSTMENT
Function • Adjusts the top margin of media for single-sided printing.
• To correct a misaligned print image.
PLAIN PAPER
Use THICK
ENVELOPE
TRANSPARENCY: Adjust the head margin of transparency.
Setting 1. Select [TOP ADJUSTMENT] and press the Menu/Select key.
/procedure 2. Select desired paper type and press the Menu/Select key.
3. Select desired adjustment amount with the up key /down key
Menu/Select key.
B. LEFT ADJUSTMENT
Function • Adjusts the left margin of media for single-sided printing.
• To correct a misaligned print image.
LEFT ADJ TRAY 1: Adjust the left margin of media fed from tray 1 (manual tray.)
Use LEFT ADJ TRAY 2: Adjust the left margin of media fed from tray 2.
LEFT ADJ TRAY 3: Adjust the left margin of media fed from tray 3.
LEFT ADJ TRAY 4: Adjust the left margin of media fed from tray 4.
Setting 1. Select [LEFT ADJUSTMENT] and press the Menu/Select key.
/procedure 2. Select desired tray and press the Menu/Select key.
3. Select desired adjustment amount with the up key /down key
Menu/Select key.
182
: Firmware of engine
: Firmware of finisher
(only when the optional staple finisher is mounted.)
: Boot firmware
: Adjust the head margin of plain paper.
: Adjust the head margin of thick paper.
: Adjust the head margin of envelope.
-15 to +15 (1 step: 0.2 mm)
-15 to +15 (1 step: 0.2 mm)
Field Service Ver. 1.0 Apr. 2008
and press the
and press the