Job Separation; Image Rotation; Quality Menu; Color Mode - Konica Minolta Bizhub-C31P Service Manual

Field Service Ver. 1.0 Apr. 2008
9.4.6

JOB SEPARATION

Function
• Selects whether or not to use a shift function for each job that prints to the staple fin-
isher.
Use
Setting • The default setting is OFF.
/procedure
NOTE
• This menu is available only when a staple finisher option is installed.
• This setting is disabled when "SUB TRAY" or "STAPLING" is selected for [FIN-
ISHING].
• This function is available only for the following media types and media sizes.
Media type: Plain/Recycled/Letterhead paper.
Paper size: 182 to 216 mm in width and 257 to 356 mm in length
9.4.7

IMAGE ROTATION

Function • Prints 180 degrees rotated images.
• To exit the leading edge of a printed image first during printing when an optional sta-
Use
ple finisher is not installed.
Setting • The default setting is OFF.
/procedure
NOTE
• This menu is available only when an optional staple finisher is not installed.
9.5

QUALITY MENU

9.5.1

COLOR MODE

Function • Sets the color mode for printing.
Use • To specify whether jobs should be printed in color or grayscale.
Setting • The default setting is COLOR.
/procedure
9.5.2

BRIGHTNESS

Function • Sets the brightness of the printed image.
Use • To adjust the brightness of the printed image.
Setting • The default setting is 0 %.
/procedure
-15 %
ON
ON
"COLOR"
-10 % -5 % "0 %"
"OFF"
"OFF"
GRAYSCALE
+5 % +10 % +15 %
9. Menu
131