Konica Minolta Bizhub-C31P Service Manual page 221

11. SERVICE MENU
(3) MANUAL DUPLEX
Functions • Adjust the 2nd image transfer output (ATVC) on the manual duplexed pages for each
media type.
Use • To use when the transfer failure at the trailing edge occurs.
Adjustment • The default setting is 0.
Range
Adjustment To increase the ATVC value (in the direction of a foggier image),
Instructions decrease the setting value.
To decrease the ATVC value (in the direction of a less foggy image),
increase the setting value.
Setting/ 1. Select [TRANSFER POWER] and press the Menu/Select key.
Procedure 2. Select [MANUAL DUPLEX] and press the Menu/Select key.
3. Select desired media type with the up key /down key
key.
4. Select desired setting value with the up key /down key
Select key.
E. IMG ADJ THICK
Functions • To fine-adjust density of printed images of each color for thick paper and OHP trans-
parencies.
Use • To change the density of the printed image for each color with thick paper and OHP
transparencies.
Adjustment • The default setting is 0.
Range
Adjustment Light color: increase the setting value
Instructions Dark color: decrease the setting value
Setting/ 1. Select [IMG ADJ THICK] and press the Menu/Select key.
Procedure 2. Select desired color with the up key /down key
3. Select desired setting value with the up key /down key
Select key.
F. IMG ADJ BLACK
Functions • To fine-adjust the density of the printed image for a black printing.
Use • To vary the density of the printed image of a black printing.
Adjustment • The default setting is 0.
Range
Adjustment If the black is light, increase the setting value.
Instructions If the black is dark, decrease the setting value.
Setting/ 1. Select [IMG ADJ BLACK] and press the Menu/Select key.
Procedure 2. Select desired setting value with the up key /down key
Select key.
184
Field Service Ver. 1.0 Apr. 2008
-8 to +7
and press the Menu/Select
and press the Menu/
-5 to +5
and press the Menu/Select key.
and press the Menu/
-2 to +2
and press the Menu/