Gray Scale Page; Startup Options; Auto Continue; Hold Job Timeout - Konica Minolta Bizhub-C31P Service Manual

9. Menu
9.9.4

GRAY SCALE PAGE

Function • Sets the color mode (color or monochrome) applied to monochrome pages included
in a color print job.
Use
AUTO
GRAYSCALE PRINT: Automatically determines color or monochrome on a job's
COLOR PRINT
Setting • The default setting is AUTO.
/procedure
9.9.5

STARTUP OPTIONS

A. DO STARTUP PAGE
Function • Sets whether a startup page is printed at startup of the printer.
• To specify whether a startup page is printed.
Use ON : Start up page is printed at startup the printer.
OFF : Start up page is not printed at startup of the printer.
Setting • The default setting is OFF.
/procedure
9.9.6

AUTO CONTINUE

Function • At the time of the following operator call, continues auto printing by ignoring the
media type or size.
• "PAPER EMPTY" (except "MANUAL FEED"), "xxxx SIZE ERROR", "xxxx TYPE
ERROR".
Use • To specify whether printing should continue when the specified media size and type
are not available.
ON : Auto continuous printing is ON.
OFF : Auto continuous printing is OFF.
Setting • The default setting is OFF.
/procedure
9.9.7

HOLD JOB TIMEOUT

Function • Sets the amount of time before a job saved temporarily in the printer is automatically
deleted.
Use • To change the amount of time a job is held before being deleted.
Setting • The default setting is DISABLE (No auto delete.).
/procedure
"DISABLE"
NOTE
• This menu is available only when an optional hard disk kit is installed.
158
: Automatically determines color or monochrome from the
job's first page.
page basis.
: Always makes color printing for a job where it selected color
print.
"AUTO" GRAYSCALE PRINT
ON
ON
1 hour
Field Service Ver. 1.0 Apr. 2008
"OFF"
"OFF"
4 hours 1 day
COLOR PRINT
1 week