Konica Minolta Bizhub-C31P Service Manual page 189

9. Menu
B. NETWARE
(1) ENABLE
Function • Enables NetWare.
• To specify that the printer is connected to a NetWare network.
Use YES : Enable NetWare. Printing can be done via NetWare.
No
Setting • The default setting is NO.
/procedure
C. APPLETALK
(1) ENABLE
Function • Enables AppleTalk.
• To specify that the printer is connected to an AppleTalk network.
Use YES : Enable AppleTalk. Printing can be done via AppleTalk.
No
Setting • The default setting is YES.
/procedure
D. SPEED/DUPLEX
Function • Sets the communication speed and method of network.
Use • To set the network communication speed and method.
Setting • Setting items
/procedure Network speed (SPEED): AUTO, 10 Mbps, 100 Mbps, 1,000 Mbps
Duplex mode (DUP): AUTO, full-duplex mode, half-duplex mode
• The default setting is AUTO.
E. IEEE802.1X
(1) ENABLE
• Prevents unauthorized access by performing authentication by the RADIUS server
Function
under the network environment.
• Set this function to YES when a network connection is made using the authentication
Use
server (RADIUS server).
Setting • The default setting is NO.
/procedure
152
: Disable NetWare. Printing cannot be done via NetWare.
YES
: Disable Apple Talk. Printing cannot be done via AppleTalk.
"YES"
"AUTO" 10BASE FULL
100BASE FULL 100BASE HALF
YES
Field Service Ver. 1.0 Apr. 2008
"NO"
NO
10BASE HALF
1000BASE FULL
"NO"