6. Other
6.3.22
Tray1 Paper Pick-up Solenoid (SL1)
[1]
[5]
6.3.23
Registration Roller Solenoid (SL2)
56
[2]
[3]
[4]
4139fs2030c1
[6]
4139fs2050c0
[2]
[1]
4139fs2051c1
Field Service Ver. 4.0 Feb. 2006
1. Remove the High Voltage Unit.
☞ 46
2. Remove one screw [1], unlock the
tab [2], and remove the wiring saddle
[3]. Then, remove the shield [4].
Precaution for Reinstallation
• When reinstalling the shield, make
sure that no part of the harness is
wedged in the mechanism.
3. Remove the screw [5] and the Tray1
Paper Pick-up Solenoid [6].
1. Remove the Right Cover.
☞ 34
2. Remove the Power Supply Cooling
Fan Motor Assy.
☞ 43
3. Disconnect the connector, remove
the screw [1], and remove the Regis-
tration Roller Solenoid [2].