Exit Tray Route Change Solenoid (Sd1) - Konica Minolta pagepro 5650EN Service Manual

3. Other
3.3.8

Exit tray route change solenoid (SD1)

1. Remove the top cover.
See P.7
2. Remove the front cover.
See P.8
3. Remove the offset tray control board.
See P.8
4. Remove the offset motor.
See P.9
[1]
10
5. Remove two screws [1], and remove
the exit tray route change solenoid
[2].
[2]
A0FJF2C508DA
Field Service Ver. 1.0 Nov. 2007