Konica Minolta Bizhub-C31P Service Manual page 107

6. Other
[1]
< 0.1mm
9. To reinstall, reverse the order of removal.
70
8. While pushing the positioning protru-
[3]
NOTE
• Check that the two drive gears [3] of
• Use a 0.1 mm piece of a thickness
[2]
• Check that the shield sheet which
A011F2C057DA
Field Service Ver. 1.0 Apr. 2008
sion [1] of the drawing up transporta-
tion assy against the housing, fix the
assy with one screw [2].
the drawing up transportation assy
are engaged.
gauge to check the gap between the
positioning protrusion [1] and the
main body frame. Make sure that
the piece of the thickness gauge
cannot pass through the gap.
(A transparency can replace the
thickness gauge.)
confirmed in step 4, is well
grounded onto PH unit base plate at
malt of drawing up transportation
assy.