Toner Supply Motor/C,K (M7); Fusing Motor (M4) - Konica Minolta Bizhub-C31P Service Manual

Field Service Ver. 1.0 Apr. 2008
6.3.27

Toner supply motor/C,K (M7)

1. Remove the PWB box/1.
See P.74
[3]
6.3.28

Fusing motor (M4)

1. Remove the PWB box/1.
See P.74
2. Remove the PWB box/2.
See P.75
[1]
[1]
[2]
A011F2C067DA
[2]
[3]
A0EAF2C054DA
2. Disconnect the connector [1] and
remove two screws [2], and the toner
supply motor/C,K [3].
NOTE
• When installing the toner supply
motor/C,K [3], try to insert it
straight, and take care not to dam-
age the gears.
3. Disconnect the connector [1] and
remove four screws [2], and the fus-
ing motor [3].
NOTE
• When installing the fusing motor
[3], try to insert it straight, and take
care not to damage the gears.
6. Other
77