Driving Unit - Konica Minolta Bizhub-C31P Service Manual

Field Service Ver. 1.0 Apr. 2008
6.3.19

Driving unit

1. Remove the PWB box/1.
See P.74
2. Remove the PWB box/2.
See P.75
3. Remove the high voltage unit/1.
See P.59
4. Remove the color PC drum motor.
See P.75
5. Remove the developing motor/K.
See P.76
6. Remove the fusing motor.
See P.77
7. Remove the intermediate transport motor.
See P.78
8. Remove the media feed and transport assy.
See the steps 1 to 6 on P.82 "Media feed clutch/1".
[2]
12. Remove the pressure/retraction clutch/1 assy.
See the steps 3 on P.81 "Pressure/retraction clutch/1".
[1]
[2]
A0EAF2C049DA
[1]
[1]
A0EAF2C050DA
9. Disconnect the connector [1].
10. Remove the harness from two wire
saddles [2].
11. Remove seven screws [1], and
remove the driving assy [2].
NOTE
• When installing the driving unit
assy [2], take care not to damage or
soil the gears.
6. Other
71