Table of Contents
Advertisement
Main Menu
Tip:
If you assign a hunt group number to a feature key, you can log
out from and log onto the hunt group by pressing single key. The
display will show you which hunt group number is assigned to
the feature key, which is useful if you are a member of several
hunt groups (see also Programming Functions (Features)
starting on page 134).
5 Auto call Answer.
telephone are answered automatically. Enter the period of time in seconds
under
(a value between 0 and 99 seconds). Then select whether
Duration:
the automatic call answering should be activated for
or for
calls
Int. & Ext. calls
tivate automatic call answering with
: If there are multiple trunk keys configured on your telephone,
6 Device busy
you can configure that as soon as one of the trunk keys is occupied your
device is considered busy. Any further callers hear the busy signal. You can
activate this function with
designate the function is activated.
MenuCard "Call Forwarding"
M P
Select
2 Call forwarding
: When you have multiple trunk keys configured on your tele-
1 Call diversion
phone, you can programme call forwarding for each of these keys individ-
ually. To do so, select the desired key from the displayed list and press
If the call forwarding should apply to all configured trunk keys, select the
menu entry and press
Device
Select
Immediately
O
press
. Then key in the
chapter entitled Manual or Automatic Line Seizure starting on page 59).
: When programming call forwarding after time, enter the time in
Duration
seconds after which a call is to be forwarded (10 ... 120 seconds). If you do not
enter a value, the default time interval provided by the system administrator
at system configuration is used (default: 20 seconds).
Then select whether
forwarded to the destination (
function to a feature key (see also Programming Functions (Features) starting
on page 134), you can also enter a
: You can specify a period of time after which calls to your
. You can activate this function with
Off
or deactivate it with
On
, followed by ...
O
.
,
or
After delay
Busy
of the call forwarding (please refer to the
Dest.
,
Internal calls
External calls
). If you assign the "Call diversion"
Dest.
Text
Features and MenuCards
Internal calls
.
. A "+" appears to
Off
to specify the type of forwarding and
or
Int./ext. calls
for a label for the key. The label is
,
External
or deac-
On
O
.
are to be
113
Advertisement
Table of Contents
