Table of Contents
Advertisement
Main Menu
a few seconds after configuring for call forwarding to be acti-
vated in the exchange.
: "Divert door" is available for door calls. Providing you have
4 Divert door ...
the relevant authorisation, you can forward door calls to your telephone to
another (internal or external) telephone (a so-called "pharmacy line"). If
several door bells are configured on your communications system, select first
the door bell whose calls are to be diverted. Then key in the
forwarding (please refer to the chapter entitled Manual or Automatic Line
Seizure starting on page 59). You can activate the forwarding function with
, and deactivate it with
On
the type of entrance intercom you have. Consult your system administrator if
you have questions about the configuration of the door bells.
: This function allows you to configure call forwarding for
5 Remote divert
other users' call numbers. Programming call forwarding for a virtual call
number is also possible (please refer to Call for a Virtual Number (Tele
Secretary) starting on page 68 also). You must have "Call forwarding for
other user" authorisation to be able to do this, otherwise this menu item will
not be displayed on your terminal. You can also only configure call
forwarding for users whose terminal has not been blocked for this type of
access (users themselves have authorisation to "Prevent call forwarding by
other user"). Please consult your system administrator if you have any ques-
tions about these authorisations.
Enter the internal number that you want to forward or select a number from
the telephone book. The rest of the procedure is the same as configuring the
"Call diversion" function (see page 113).
6 Follow me
: This type of call forwarding is configured on another than your
own terminal. The user's PIN number for the source telephone is required for
this function (see page 120). On the other terminal, select the
item from the
2 Call forwarding
number for which calls are to be forwarded to this telephone. Then enter the
of the source telephone. You can switch off the "Follow Me" function
PIN:
with
On
/
Off
.
You can switch off the "Follow Me" function on the other (source) telephone
by switching off the "Call diversion" function.
If the "Follow Me" function is active, all the call numbers of the other tele-
phone are forwarded immediately.
. How many door bells are available, depends on
Off
MenuCard. As
Features and MenuCards
Dest.
6 Follow me
Source
, enter the internal call
of the call
115
Advertisement
Table of Contents
