Features and MenuCards
A "Device" busy key can only be programmed on the web console of the
Forum 500 / Forum 5000 communications system (in the Telephony:
Devices: System phones menu).
Notes for the System Administrator
●
A user must have the Program busy keys authorisation for programming
a busy key on the terminal. This authorisation is configured in the User
Manager: User groups menu.
●
Users cannot prevent authorised users from monitoring their call numbers
via busy keys on their terminals.
●
Programming busy keys on the web console is either done by the system
administrator or by a user with the Change or Change-Personal authori-
sation for the Telephony: Devices: System phones menu. These authori-
sations are configured in the User Manager: Service profiles menu.
●
For further information on busy keys and PBX networking, please refer to
the online help and in the "Mounting and Commissioning" guide
(Forum 523/524, Forum 525/526, Forum 550/560, Forum 5004/
5008/5012) or "Commissioning and Maintenance" guide (Forum 5500).
Programming the "Call number" Busy Key on the
Terminal
g
Press the programmable key for a long time.
The
P O
Select
The
Selecting subscriber from phone book
P
Select
When you press the
phone book entries saved on the communications system is
displayed. The list is sorted alphabetically and you can page
to the desired entry.
Z O
Alternatively: Enter the first few letters of the desired entry
and press the
140
Prog. feat. key
MenuCard is displayed.
, press OK key.
Prog. busy key
MenuCard is displayed.
Prog. busy key
Phone book
O
O
key.
key now, the complete list of
Busy Keys