Table of Contents
Advertisement
Remote-Programmable Call Forwarding
Z
Enter the trunk line seizure code, e. g.
Z
Enter the destination call number.
#
Press the hash key.
Deleting the Function
Z
Enter the reserved call number.
Z
Enter the system PIN.
*
Press the star key.
Z
Enter your internal call number.
#
Press the hash key.
Using the call number reserved in the Forum 500 / Forum 5000 for remote
control, you can configure or delete call forwarding "Immediate" for your
own call number from a remote location. This remotely-programmed
forwarding overwrites any other existing call forwarding. Call forwarding
"On Busy" and "After Delay" are not affected. Incorrect or non-existent call
numbers are rejected. Your authorisation is checked in the same way as for
call forwarding within the Forum 500 / Forum 5000.
A correct entry is confirmed with a positive acknowledgement signal,
provided the system administrator has not deactivated this function (in the
Configurator, Telephony: Settings menu). The external call is subsequently
ended.
Note:
The procedure is aborted if there is a pause of longer than 60
seconds between the entry of two digits. With this duration,
remote-controlled functions using GSM cell phones can also be
realised.
Remote-Controlled Functions
0
.
105
Advertisement
Table of Contents
