Call Forwarding" Menu - Proximus Forum 500 User Manual

Features and Menus
: You can view the charges of other Forum 500 /
Remote charges
Forum 5000 users by entering the other user's internal number or by
selecting a number from the telephone book.
: If your telephone belongs to one or more hunt group(s), you can
Hunt group
use this menu entry to switch hunt group signalling for your telephone on or
off. When there are multiple trunk keys configured on your telephone and
assigned to hunt group call numbers, you can switch the hunt group signalling
for each of these keys on or off. To do so, select the desired key (e. g.
L1: [internal call number]
HG No: [internal call number]
appears. Activated hunt group calls have a "+" prefixing the hunt group call
number; deactivated ones have a "-". Use the
group call signalling on or off for the call number dialled. Use the
entry to switch signalling of all hunt group calls for your telephone on or off
( / ).
On Off
Note: If you are the last reachable member of the hunt group and you
log out then any further callers will hear a busy signal.
Depending on the system configuration, additional callers can
also be forwarded to the exchange.
: If there are multiple trunk keys configured on your telephone,
Device busy
you can configure that as soon as one of the trunk keys is occupied your device
is considered busy. Any further callers hear the busy signal. You can activate
this function with On
function is activated.

"Call forwarding" Menu

First select
Call forwarding
: Programming call forwarding for one's own telephone. When
Call diversion
you have multiple trunk keys configured on your telephone, you can
programme call forwarding for each of these keys individually. To do so, select
the desired key (e. g.
Select
Immediately
the call forwarding destination (please refer to the chapter entitled Making
External/Internal Calls starting on page 38).
forwarding after time, enter the time in seconds after which a call is to be
forwarded (10 ... 120 seconds). If you do not enter a value, the default time
interval provided by the system administrator at system configuration is used
74
) and then press the
: The pick-list of hunt group call numbers
or deactivate it with
and then ...
L1: [internal call number]
, or
After delay Busy
Ok softkey.
/ options to switch hunt
on off
. A "+" appears to designate the
Off
) and then press the
for the forwarding mode. Then key in
: When programming call
Time
The Menus
menu
All
Ok softkey.