Table of Contents
Advertisement
Busy Keys
Programming a Status Key
g
Long press the programmable key, then ...
P O
select
P Z O
Select the
Enter the number (0 ... 9) to be used for operating the
programme function. For information in this regard, please
refer to the respective programme documentation. Then
press the OK key.
Z O
Select
key will be labelled with a default text. Press the OK key.
O
The
programming is saved.
Deleting a Programmed Status Key
g
Long press the programmed key, then ...
P
select
O
Press the OK key.
Busy Keys
Busy keys are function keys as well. A busy key shows you the busy state of
another internal subscriber. There are two kinds of busy keys:
●
Busy Key "Call Number": This busy key shows the busy status of a single
internal call number. This can be an internal call number of your own
communications system or a call number of a system which can be
reached via the telecommunications system network.
A "Call Number" busy key can either be programmed on the terminal or on
the web console of the Forum 500 / Forum 5000 communications
system (in the Telephony: Devices: System phones menu).
●
Busy Key "Device": This busy key monitors all trunk keys configured on a
terminal. If one of these trunk keys is busy, the busy key signals that the
terminal is busy.
and press the OK key.
Status key
item from the
Key-ID:
to label the key. If you do not enter a text, the
Text:
menu item is now selected. Press the OK key. The
Save
.
Delete key
Features and MenuCards
MenuCard.
Status key
139
Advertisement
Table of Contents
