Table of Contents
Advertisement
Features and MenuCards
Note:
In the Configurator of the Web console, the Dialling tones as
cadences setting can be used to specify whether melodies are
to be played in full or whether all melodies are to be played at
the same speed (played as cadences). The setting in the Config-
urator also affects melodies on system telephones if selected,
so that you may only hear parts of some melodies.
4 Message ring tone
on your system telephone or calls for members of your pick-up group. These
can then be distinguished from one another.
Select
1 Short messages
message you can specify
instead of a melody. The short beeping tone is the default setting for all
messages. Use the
Note:
When configuring the pick-up groups in your Forum 500 /
Forum 5000's Configurator, your system administrator can
also specify that calls for members of your pick-up group be
displayed on your system telephone as well.
: This switches your telephone to automatic dialling (
5 En-bloc dialling
direct dialling (
Off
Note:
If you use CTI applications, you should switch off the "block
dialling" function on your system phone. This applies for all CTI
applications, except for the application Forum CTI.
6 Charge settings
: The charges for automatically dialled external calls can be
displayed on the system telephone as an amount (
your network operator transmits information about charges. Alternatively,
the
for internal or external calls can be displayed on the system
Duration
telephone. The
Off
7 Headset
: If you use a headset with your system telephone, you can switch
this function on and off here. When the headset is switched on you can make
and accept calls by pressing the headset key
and off select
1 Headset
switched off, the headset key on your system telephone will not function.
You can adjust the volume of the headset and the microphone to six different
levels using the menu items
=
minus key
0
5
...
.
118
: You can set different ringer signals to signal messages
,
,
2 E-Mail
3 Pick-up
and
1 Volume
=
keys to select a different setting.
).
setting means that no charges are displayed.
and then the option
2 Receiver vol.
to adjust the volume, or enter a number between
or
4 Voicebox
or a short beeping tone
2 Melody
Charge
K
. To switch this function on
On
or
Off
. If Option
and
3 Sender vol.
Main Menu
. For each type of
) or
On
per call), provided
1 Headset
is
. Use the plus/
Advertisement
Table of Contents
