Table of Contents
Advertisement
Programming Keys
Programming Multiple Functions and/or Call Numbers on a Key
g
Long press the programmable key, then ...
P O
select
Z O
Select
key will be labelled with the default text (either "Stack" or
"Link"). Press the OK key.
P O
Select
shown ...
●
●
Then press the OK key.
The MenuCard "Stack" or "Link" is shown with the new entry
in the list. You can now add another entry. When all memory
locations are occupied you will hear a negative acknowl-
edgement tone.
O
To end programming, select the
the OK key. The programming is saved.
Using a Feature Key (Stack / Link)
The LED of a key programmed as a stack has no function. You can use a key
programmed as a Stack as follows:
●
Short key press: The programmed entries are displayed in a selection
menu. Select the desired entry and press the OK key
programmed call number will be dialled or the programmed function
executed.
●
Long key press: The MenuCard for the key will be opened. You can now
edit the stack's entries.
The illuminated LED of a key programmed as a link indicates that all func-
tions of the link are active (switched on). You can use a key programmed as a
Link as follows:
or
Stack
Link features
to label the key. If you do not enter a text, the
Text:
and make a selection from the MenuCard
Add
to programme a feature key (see Programming
Features
Functions (Features) starting on page 134),
to programme a destination key (see Programming
Dest.
Call Numbers (Destinations) starting on page 133); only
possible when programming a stack.
Features and MenuCards
and press the OK key.
Save
menu item. Then press
O
. The
137
Advertisement
Table of Contents
