Using The Busy Key "Call Number - Proximus forum 515 User Manual

Features and MenuCards

Using the Busy Key "Call Number"

Busy Display
The busy status of a monitored call number is signalled as follows:
● LED blinks: The call number is called.
● LED lights up: The call number is busy.
Calling Subscribers via the Busy Key
g
Press – when the call number is not busy, the LED is off –
(LED off) the busy key. The internal subscriber whose call number is
assigned to the busy key, is called.
CallPickup via the Busy Key (Pickup)
The busy key LED blinks when there is an incoming call. To accept the call:
g H
Press the busy key and pick up the handset. This means the
(LED off) call number called remains available.
Transferring Accepted Call
The accepted call can be transferred to the originally called subscriber via
the busy key.
g
Press the busy key. The caller is held.
(LED blinks)
G h
If the subscriber answers, announce transfer of the call, and
(LED lights up) replace the handset. The call has now been transferred.
alternatively:
h
If you wish to transfer the call without announcement,
(LED blinks) replace the handset. The subscriber is called.
If the subscriber called does not accept the transferred call within a certain
time interval (45 seconds are the default), you will be called back (the display
shows callback information).
142
Busy Keys