Download  Print this page

Interface Settings; Settings From The Control Panel; Setting Up The Ethernet Driver - Canon imageRUNNER 105 Network Manual

Hide thumbs

Advertisement

Interface Settings

You can specify the interface settings for the machine using any of the following:
Control panel
Web browser (Remote UI)
If you are using Ethernet to interface, see "Setting Up the Ethernet Driver," on p. 2-
3.
If you are using Token Ring to interface, see "Setting Up the Token Ring," on p. 2-7.
IMPORTANT
When configuring the interface settings for the first time, use the control panel of this
machine. After configuring the protocol settings, you can change the content by using a
web browser (Remote UI).
When you use Token Ring, it is necessary to purchase an optional Token Ring Kit.
You cannot use Ethernet and Token Ring at the same time. When a Token Ring board is
already installed on the machine, you cannot use Ethernet. To use Ethernet, remove the
Token Ring board from the machine.

Settings from the Control Panel

IMPORTANT
Settings specified from the control panel become effective after the machine is restarted
after the procedure.
For details about entering characters using the touch panel display, see "Chapter 1
Before You Start Using This Machine" in the Reference Guide.

Setting Up the Ethernet Driver

1
Press
(Additional Functions).
Interface Settings
2-3
2

Advertisement

Table of Contents

   Also See for Canon imageRUNNER 105

Comments to this Manuals

Symbols: 0
Latest comments: