Startup Time Settings - Canon imageRUNNER 105 Network Manual

10
Restart the machine.
M
Turn OFF the machine, wait at least three seconds, and then turn it ON again.
The e-mail/I-fax settings are completed.

Startup Time Settings

When you connect the machine to a switching hub, it may not be able to connect to
a network even though your network settings are set correctly.
This occurs because the spanning tree process performed between switching hubs
prevents them from communicating with each other immediately after the machine
connects to a switching hub.
In this case, use the following procedure to delay the start of communication.
1
Press (Additional Functions) on the control panel, and
then press [System Settings]
touch panel display.
M
Press [ ]
→
Sample screen for imageRUNNER 3300i
→
[Startup Time Settings].
[Network Settings] on the
Protocol Settings
3
3-25