Configuration - Canon imageRUNNER 105 Network Manual

7
8
9
7
10
Configuration
After you have installed NetSpot, you must enable communication with the network
interface. For instructions on configuring the network, see "Getting Started" in the
online NetSpot User's Guide.
7-6 Installing and Using NetSpot
From the # prompt, run the shell script as follows:
#./install.sh
The results are saved in install.log, which includes variables that you need later.
Edit .profile file (Bourne shell), .kshrc file (Korn shell), or
.cshrc file (C shell), and then set the following environment
variables:
- NETSPOT_HOME (directory in which NetSpot is installed)
- NETSPOT_DB (directory in which the database of devices is to be located)
- NETSPOT_HELP_BROWSER (browser for viewing NetSpot help files)
The browser's directory must be specified in the PATH environment variable.
- NLSPATH (directory containing netspot.cat)
Recommended paths are:/usr/openwin/lib/msg/%LANG/%N.cat (for
- XAPPLRESDIR or XENVIRONMENT (location to which the install script copied
the NetSpot resource)
To install devices, run the following shell script:
#./cpinstall.sh <device id> <device name> <IP address>
device id: 12-digit MAC address
device name: name you want to assign to the device
IP address: dotted decimal notation (xxx.xxx.xxx.xxx)
Follow the shell's instructions.
OpenWindows Desktop) and
/usr/dt/lib/nls/msg/%LANG/%N.cat (for CDE).