Tcp/Ip Settings - Canon imageRUNNER 105 Network Manual

TCP/IP Settings

NOTE
•
When settings are made using DHCP, BOOTP, or RARP, the setting values will appear in
the TCP/IP Settings screen after the machine is restarted. (If the IP address, host name,
and domain name have been set previously, these will be overwritten by the settings
specified using DHCP, BOOTP, or RARP.)
1
2
3
3-4 Protocol Settings
Press (Additional Functions).
On the touch panel display, press [System Settings].
Sample screen for imageRUNNER 3300i
IMPORTANT
•
If the message <Enter the System Manager ID and Password using the numeric
keys> appears on the touch panel display, enter the system manager ID and
password. For instructions on entering the system manager ID and password, see
"Chapter 4 System Manager Settings" in the Reference Guide.