Canon imageRUNNER 105 Network Manual page 75

3
Install the printer driver. (See the Driver Guide.)
When the dialog box for selecting the printer management appears, select [My
Computer]. Do not select [Network printer server].
The port selection can be changed after installation. You can select any port,
such as [LPT1].
4
Open the [Printer Properties] dialog box.
M
On the [Start] menu, point to [Settings], and then click [Printers].
M
Right-click the printer icon you want to use for printing.
M
On the pop-up menu, click [Properties].
5
Set up the printing destination.
M
Click the [Ports] tab to display the [Ports] sheet.
M
Click the [Add Port...] button to open the [Printer Port] dialog box.
M
From [Available Printer Ports], select [LPR Port], and then click the [New
Port...] button.
The [Add LPR compatible printer] dialog box opens.
M
Enter the IP address or printer host name in [Name or address of server
providing lpd].
M
Enter "LP" in [Name of printer or print queue on that server], and then click the
[OK] button.
NOTE
•
You can specify a print queue in [Name of printer or print queue on that server].
The following three print queues are available:
- LP
The machine prints according to its spool settings. Normally enter LP as a print
queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk regardless of
its spool settings.
- DIRECT
The machine prints without spooling a print job on the hard disk regardless of its
spool settings.
Setting Up a Computer for Printing (Windows/UNIX)
3
3-35