Setting Up The Token Ring - Canon imageRUNNER 105 Network Manual

Copying" in the Copying Guide.) When using a cross cable, set each item for
"Ethernet Driver Settings" as follows:
- Auto Detect: Off
- Communication Mode: Full Duplex
- Ethernet Type: 100Base-TX
The Ethernet driver settings are completed.

Setting Up the Token Ring

1
Press (Additional Functions).
2
Press [System Settings].
Sample screen for imageRUNNER 3300i
IMPORTANT
•
If the message <Enter the System Manager ID and Password using the numeric
keys> appears on the touch panel display, enter the system manager ID and
password. For instructions on entering the system manager ID and password, see
"Chapter 4 System Manager Settings" in the Reference Guide.
Interface Settings 2-7
2