Netware Network Setup Operating Procedures - Canon imageRUNNER 105 Network Manual

NetWare Network Setup Operating Procedures

To use a NetWare network, it is necessary to perform the following procedure.
1
4
2
3
4
IMPORTANT
•
It is recommended that the network manager perform steps 1, 2, and 4 above.
•
To configure settings with software other than the control panel of the machine or
NetSpot, TCP/IP protocol must be supported by your network environment.
4-2

NetWare Network Setup Operating Procedures

NetWare Print Service Settings (See "NetWare Print Service Settings," on p. 4-
3)
Specify the NetWare print service settings. Use any of the following software to specify the settings from the
computer.
• NWADMIN or PCONSOLE (Novell software provided with NetWare)
Protocol Settings (See "Protocol Settings," on p. 4-8)
Specify the protocol settings. Use any of the following to specify the settings.
• Control panel
• NetSpot
• Web browser (Remote UI)
Computer Settings for Printing (See "Setting Up a Computer for Printing," on
p. 4-15)
Specify the settings for each computer you use for printing.
Computer Settings for a File Server (See "Setting Up a Computer as a File
Server," on p. 4-16)
Specify the settings of the computer receiving data sent from the machine.