Installing And Using Netspot; Installation (Windows); Installation (Macintosh) - Canon imageRUNNER 105 Network Manual

Installing and Using NetSpot

This section contains information about installing, configuring, and using NetSpot. It
assumes that the network interface has been installed in the machine, as described
in the documentation provided.

Installation (Windows)

1
2
7

Installation (Macintosh)

1
2
7-4

Installing and Using NetSpot

Insert the iR Series Printer Driver Software Disc 1 (English)
into the CD-ROM drive.
Run the installation program.
M
Find the subdirectory for the desired language in the \netspot\Windows
directory on the CD-ROM.
M
Run Setup.exe in that subdirectory, and then follow the instructions that appear.
You can install either an administrator or an end-user version of NetSpot. If you
plan to monitor devices, install the end-user version. If you plan to configure as
well as monitor devices, install the administrator version.
Insert the iR Series Printer Driver Software Disc 1 (English)
into the CD-ROM drive.
Run the installation program.
M
Find the subdirectory for the desired language in the \netspot directory on the
CD-ROM.
M
Double-click the [Install program] icon in that subdirectory, and then follow the
instructions that appear. You can install either an administrator or an end-user
version of NetSpot. If you plan to monitor devices, install the end-user version.
If you plan to configure as well as monitor devices, install the administrator
version.