Canon imageRUNNER 105 Network Manual page 34

M
Select the appropriate ring speed and the communication method for your
environment.
NOTE
•
If "Auto Detect" is selected, the ring speed and communication method are
specified automatically.
6
Specify the [Maximum Frame Size] settings.
Enter a value appropriate for your environment using the keypad on the control
panel.
IMPORTANT
•
The machine may not work normally with the default settings. Enter a value
appropriate for your environment.
7
To perform source routing, select [On] for [Use Source
Routing].
Normally select [On] for [Use Source Routing].
If you select [Off] for [Use Source Routing], skip to step 10.
The allowable combinations of the "Token Ring Settings": [Use Source Routing],
[All Broadcast Request], and [All Broadcast Response Notice] are shown below:
- Off/invalid/invalid
- On/On/invalid
- On/Off/On
- On/Off/Off
IMPORTANT
•
If the machine does not perform source routing correctly on a local network, select
[Off] for [Use Source Routing].
Interface Settings 2-9
2