G
If you want to print a banner page only when a job is set to output a
banner
M
Select [On].
G
If you do not want to print a banner page regardless of the banner
page output setting of a print job
M
Select [Off].
16
Confirm the settings you specified, and then press [OK].
The display returns to the TCP/IP Settings screen.
In the case of the imageRUNNER 5000i, skip to step 23.
17
Specify the Raw settings.
M
On the TCP/IP Settings screen, press [RAW Settings].
M
If you want to use Raw as a print application, select [On].
Sample screen for imageRUNNER 3300i
M
Confirm the settings you specified, and then press [OK].
The display returns to the TCP/IP Settings screen.
18
Specify the IPP settings.
M
On the TCP/IP Settings screen, press [Use IPP].
Protocol Settings
3-11
3