Netspot For Unix; Supported Protocols; Related Documentation - Canon imageRUNNER 105 Network Manual

NetSpot for UNIX

Computer
Operating system
Desktop environment
Minimum RAM
Minimum disk space

Supported Protocols

NetSpot supports the following protocols for device communication. For information
about protocols, frame types, and print applications you can use with your network
board, see the documentation for the specific network board.
Windows
Macintosh
UNIX
*1 To use NetSpot in Novell NetWare environment, the following are required:
Server software:
Workstation software: Novell NetWare Client
*2 When using NetSpot with NetBIOS on Windows 95, you must upgrade to WinSock 2, available from the Microsoft
World Wide Web site. (WinSock 2 is included in Windows 98/Me/NT/2000.)

Related Documentation

The following documentation is available to help you use NetSpot:
•
This Network Guide
•
The NetSpot User's Guide
This Network Guide gives an overview of NetSpot and describes installation
procedures.
The online NetSpot User's Guide in HTML format is copied to your hard disk during
installation of NetSpot. You can read the online guide with a frames-compatible
browser such as Netscape Navigator 3.0 (or later) or Microsoft Internet Explorer 3.0
(or later).
To access the NetSpot User's Guide, in NetSpot click [Contents] on the [Help] menu
(for Windows/UNIX), or click [NetSpot Help...] on the [Apple] menu (Macintosh).
The README.TXT (Windows), Read Me (Macintosh), or README (UNIX) file is
located in the directory in which NetSpot is installed. These files contain last-minute
information that could not be included in the other documentation.
SPARC 5 or higher (Server or Workstation)
Sun Solaris 2.6, Solaris 7 or later
Open Windows 3.2 or later or
Common Desktop Environment (CDE) 1.0 or later
32 MB
12 MB
*1
IPX/SPX , TCP/IP, NetBIOS
TCP/IP, AppleTalk
TCP/IP
NetWare version 3.x, 4.x, or 5.x
*2
Introduction
7
7-3