CPI GTR180 Service Manual page 90

CPI MOTOR GTR180
IX.DRIVE AND DRIVEN PULLEYS & KICK STARTER
Inspection clutch outer.
Service limit： 125.5mm
Measure the inner diameter of friction surface for clutch
outer. If it is out of standard , please replace the new one.
Inspection clutch brake pad
Service limit：2.0mm
Measure the width of each pad, if it is not as standard ,
replace the new parts.
Inspection clutch spring
Measure the clutch spring's free length, if it is out of
standard, please replace for new part.
Inspection driven pulley assy.
Inspection driven pulley face.
Measure the driven face O. D.
SERVICE LIMIT: 33.92 mm
Inspection movable driven face.
Measure the movable drive face I. D.
SERVICE LIMIT: 34.06 mm
《9 -16 》