CPI GTR180 Service Manual page 73

CPI MOTOR GTR180
VIII.CARBURETOR REMOVAL
CARBURETOR INSTALLATION
Tighten the drain screw.
Install the carburetor onto the intake manifold and
tighten the band. Install the air cleaner connecting tube
and tighten the clamp.
Connect the throttle cable to the carburetor.
Install:
1. Throttle Cable [A]
2. Air Cleaner Connecting Tube clamp [B]
3. Intake Manifold Band [C]
Connect the auto bystarter wire.
Connect the fuel tube and vacuum tube to the carburetor.
Perform the following inspections and adjustments:
1. Throttle grip free play
2. Idle speed
《 8-11 》