CPI GTR180 Service Manual page 101

CPI MOTOR
X.ELECTRIC SYSTEM
BATTERY REMOVAL
Remove:
Disconnect the negative (–) cable.
Slide out the positive (+) terminal cap and then
disconnect the positive (+) cable.
Be sure to disconnect the negative (–) cable first.
Remove the battery.
BATTERY INSTALLION
Put the battery into the battery case.
Apply a light coat of grease on the terminals to
prevent corrosion.
Install the positive (+) cable first.
Cover the positive (+) terminal with the cap.
Install the negative (–) cable.
BATTERY ACTIVATION
ELECTROLYTE FILLING
Make sure that the model name "A" of the
electrolyte container matches the model name
"B" of the battery. These
ATTENTION!!!
Names must be the same.
NOTE
《 10-7 》
GTR180