Change Engine Oil - CPI GTR180 Service Manual

CPI MOTOR GTR180
VI.OIL PUMP REMOVAL

Change engine oil

ATTENTION!!!
Please drain the engine oil when the warm engine which
can assure the engine oil is smooth.
Put the dish under the engine, disassemble the drain plug
bolt to drain engine oil. If drain plug bolt washer is damaged,
it must change new one.
Lock the drain plug bolt.
Torque：3.5~4.5kgf-m
Clean the engine oil filter screen
Disassemble the tappet adj. cap assy.
Get out of the engine filter screen and spring.
Clean the engine oil filter screen.
Check the tappet adj. cap assy. ring and filter, if it was
damaged, it must change new one.
Install the engine oil filter and spring.
Lock the tappet adj. cap assy.
Torque：1.3~1.7kgf-m
Put engine oil pour tank filler sleeve
Engine oil volume：change 800 c.c.
Install oil level gauge comp. to start the engine and idle
several minutes.
Stop the engine, after 3-5 minutes, use the oil level gauge
check the oil reserve which is stand or not.
Check the engine appearance leak of engine oil.
《 6-4 》