CPI GTR180 Service Manual page 81

CPI MOTOR GTR180
IX.DRIVE AND DRIVEN PULLEYS & KICK STARTER
Disassemble flange bolts.
Disassemble the element plate.
Remove:
1. Flange bolts [A]
2. Element plate [B]
Disassemble the filter.
NOTE
Inspect the filter if it is dirty or damaged. If it is dirty or
damage, please change a new one.
Disassemble the cir-clip & washer.
Remove:
1. Cir-clip & washer [A]
Disassemble the kick starter spindle comp.
《9 -7 》