CPI GTR180 Service Manual page 30

CPI MOTOR GTR180
V.CYLINDER & PISTON
Measure piston pin bore I. D. in two directions at
right angle to each other.
SERVICE LIMITS : 15.04 ㎜
Measure the piston pin O. D. at the front, center and rear
and in tow directions across from each other.
SERVICE LIMIT : 14.98 ㎜
Measure the cylinder I.D. at a point 10 ㎜ from the bottom.
SERVICE LIMITS:57.1 ㎜
Measure the connecting rod small end I.D.
Service Limit: 17.06mm replace if over.
《 5-7 》