CPI GTR180 Service Manual page 80

CPI MOTOR GTR180
IX.DRIVE AND DRIVEN PULLEYS & KICK STARTER
Disassemble the starter kick spring.
Remove:
1. Starter kick spring [A]
Disassemble the starter idle gear shaft.
ATTENTION!!!
Idle gear shaft is dispensable to be disassembled.
Disassemble flange bolts.
Disassemble the shroud cover.
Remove:
1. Flange bolts [A]
Disassemble three screws.
Disassemble the inner cover.
Remove:
1. Screws [A]
《9 -6 》