CPI GTR180 Service Manual page 52

CPI MOTOR GTR180
VII.CYLINDER HEAD & CAM SHAFT REMOVAL
Remove the Cir-clip
Remove:
1. Cir-clip [A]
Take out the camshaft from the cam shaft holder.
Inspection camshaft
Check each cam lobe for wear or damage.
Measure the cam lobe height.
SERVICE LIMITS:
IN : 30.69 ㎜
EX : 30.28 ㎜
A
Check each camshaft bearing for play or damage.
Replace the camshaft assembly with a new one if the
bearings are noisy or have excessive play.
INSPECTION:
1. BEARINGS [A]
《 7-6 》