CPI GTR180 Service Manual page 83

CPI MOTOR GTR180
IX.DRIVE AND DRIVEN PULLEYS & KICK STARTER
Install the element plate.
Install flange bolts.
Install:
1. Element plate [A]
2. Flange bolts [B]
NOTE
When install the element plate, please check the direction.
Install the inner cover.
Install the screws.
Install:
1. Inner cover [A]
2. Screws [B]
Install the shroud cover.
Install flange bolts.
Install:
1. Shroud cover [A]
2. Flange bolts [B]
Install the kick starter spindle comp.
Install the starter kick spring.
《9 -9 》